S 3020/...-L/... (self-adhesive / not adhesive)
S 3020/...-L/... (self-adhesive) is a material combination of a polyethylene foam (thickness approx. 3 - 5 mm) covered with a composite (thickness approx. 3 - 5 mm) made of a polyurethane foam (polyester) and a PVC-artificial leather (RAL-leather colours). Self-adhesive equipment with a high-quality and moisture-resistant adhesive system based on modified acrylate. S 3020a/...-L/... (not adhesive) is a material combination of a polyethylene foam (thickness approx. 3 - 5 mm) covered with a composite (thickness approx. 3 - 5 mm) made of a polyurethane foam (polyester) and a PVC-artificial leather (RAL-leather colours).
Main function
Heat insulation, Thermoliner
Applications
Vehicle cabs, inner lining, impact protection
Options
Different colours of surfaces from artificial leather, as well with protection foil (-SF), available on request.
Transparent protection foil (-SF) on the surface, must be removed after the assembly!
Processing
Self-adhesive:
The surface must be carefully cleaned from dust, grease, oil and water.
Full area adhesion has to be insured. The adhesion strength is directly dependent from the processing pressure. The material has to be pressed in firmly, e.g. using a feed roll.
Processing temperature: 18 - 25 °C
Not adhesive:
Mechanical attachment
Adhesive with fluid glue
Processing temperature: 18 - 25 °C
Storage conditions
Dry at temperatures between 18 - 25 °C
Max storage time 6 months
Delivery forms
Self-adhesive:
Standard boards approx. 1,290 x 2,000 mm
(usable approx. 1,270 x 2,000 mm) untrimmed,
other sizes and cut-to-size pieces upon request.
Not adhesive:
Standard boards 1,380 x 2,000 mm untrimmed,
other sizes and cut-to-size pieces upon request.
