EVM seals

For seals in the field of lamination of glass and automobile industry


Our offering

  • High-quality seals, rolled goods and moulded parts out of EVM
  • According DIN standards
  • Precise cutting of specific geometries
  • Plate or rolled goods
  • Seamless XXL format
  • Individual cut
  • From quantity 1 up to series production
  • High Quality

FKM EPDM EVM
Any queries regarding this product?Then contact us using this form or call:Technische Dichtungen+49 5231 9607-20We will be happy to advise.

Contactform

Our available EVM-materials

A-FJ 65-00 (EVM)

 

Technical Data Sheet

Qualities

  • Patent-registered EVM-material (Ethylene-vinyl acetate-rubber)
  • High heat resistance
  • Excellent oil resistance
  • Compatible to Makrolon and Plexiglas
  • Complies with VW 2.8.1 P70

Resistances

A-FJ 65-00 (EVM)

Delivery forms

The material is available in rolls.
Length1,000 mm5,000 mm10,000 mm
Length1,400 mm
Thickness1 mm2 mm3 mm
Other sizes and cut-to-size pieces upon request.

General

Ethylene vinyl acetate rubber, as well classified shortly as EVA or EVM, is an elastomer in which ethylene and vinyl acetate are linked together.The properties and the resulting options for use can vary according to the amount of vinyl acetate. At Steinbach AG you will receive high-quality seals, rolled goods and moulded parts out of EVM made according to DIN standard.

Properties

EVM disposes of a good wear resistance and a high adhesive power. The sealing material links the properties of soft polyvinyl chloride to polyethylene of low density. Thus, the material even shows an excellent resistance to critical media like diesel and mineral oil. Additionally, EVM shows a high impact and tensile strength.

Furthermore, EVM disposes of insulating qualities and is resistant to weather conditions, light, ozone and heat. At the same time the elastomer gets along very well with perspex as well as with special MAKROLON®.

Benefits

  • resistant to mineral oils and diesel
  • optimum use for low-wear seals
  • heat-resistant
  • resistant to light and ozone
  • high tensile strength
  • weather-resistant
  • insulating effect
  • adhesive surface
  • compatible with perspex and special glasses like MAKROLON®

Range of uses and areas of application

Typical applications of EVM are, for example, hoses for diesel and oil pipes, seals, floor coverings, electrical cables and glass lamination. Therefore the material is preferably used in the automobile industry.

Our available formats for EVM

We will deliver our EVM rubber as rolled and plate goods, as quality seals in usual dimensions or as individual waterjet cutting. Even XXL widths are possible. Due to our modern cutting machinery technology a precise cutting of specific geometries is possible, namely with extremely clean cutting edges. We deliver our products out of EVM rubber starting already at a quantity of  1 piece. If you want to benefit from our expertise, please call us, leave a message via contact form or write us an e-mail.

Any queries regarding this product?

Then contact us using this form or call:

+49 5231 9607-20

We will be happy to advise.

Contactform